Some chic plastic furniture can also make your home more dreamy, more colorful. However, plastic furniture also has its own drawbacks and is prone to aging. Therefore, we need to learn the following maintenance methods for plastic furniture to make the furniture more durable.
1, PVC furniture is easy to aging, embrittlement, can only be used indoors, does not apply to outdoor. Avoid direct sunlight and near stoves and radiators. If the cracking can be made after the iron is hot and soft, it can also be glued with banana water and glue dissolved in PVC.
2, polypropylene furniture light, oil, good performance of chemical solvents, but the hardness is poor, should prevent collisions and scratches hard object scratches, if cracking can be repaired by hot melt method, no glue can be sticky.
3, FRP furniture performance is excellent, suitable for indoor and outdoor applications. It has a long life and is sturdy and durable, but the damage is not easy to repair. It can be repaired with screws and gaskets. Should be used to prevent overloading and accidental fracturing and scratching.
4, plastic furniture can be washed with ordinary detergent, be careful not to touch the hard object, do not brush metal brush. Wash hard, sunscreen can keep plastic furniture often used for a long time.
5, artificial leather, synthetic leather, soft leather furniture, afraid of heat, afraid of the sun, afraid of freezing, afraid of oil, can not be placed in the bathroom, kitchen use. Should use a clean soft cloth to clean. If the dirt is heavy, wipe it with a cloth dampened in a neutral detergent, wipe it with a wrung damp cloth, and then dry it with a dry cloth. Cover the furniture with artificial leather or synthetic leather, such as a sofa cover or a chair cover. Can extend the service life.
6, plastic veneer furniture not exposed to direct sunlight and to withstand local pressure, heat, to prevent the veneer joint expansion, degumming. Also to prevent local slamming, cutting cracking. The substrate of the surface furniture is mostly fiberboard, which is easy to be expanded and separated by moisture. Special attention must be paid to waterproof and moisture proof. It is possible to apply 1 to 2 coats of varnish on the substrate, that is, on the opposite side of the veneer. If the veneer is found to be detached from its substrate, the joint should be first cleaned with banana water or xylene, and then paste with adhesive to recover. After the glue is dried, the joint is closed with varnish. White latex is not water resistant and should not be used to paste plates.